Canon MP800R Benutzerhandbuch

Chapter 5

Printing Photographs Directly from a Compliant Device

To connect a PictBridge compliant device to this machine, use the USB cable supplied with the 
device.

Set up the machine.

Refer to the Setup Guide to set up the machine and make it ready for printing.

Turn on the machine.

See 

“Turning on the Machine” on page 18

.

Load the paper in the machine.

See 

“Loading Paper” on page 20

.

Connect the PictBridge compliant device to the machine.

(1) Ensure that the device is turned off.

Do not connect any equipment other than PictBridge compliant devices, Canon Bubble Jet Direct 
compatible digital cameras or optional Bluetooth Units BU-20 to the Direct Print Port of the machine. 
If you do so, electric shock, fire, or damage to the device could result.

When printing photos with the digital device connected to the machine, it is advisable to use the AC 
adapter supplied with the device. If you use the device battery, be sure to charge it fully.

The Print Head cannot be aligned using the controls of the digital device. If the Print Head 
alignment is not yet performed, execute automatic Print Head alignment, see 

“Aligning Print 

Head automatically” on page 120

.

Depending on the model or brand of your device, you may have to select a print mode 
compliant with PictBridge before connecting the device.

You may also have to turn on the device or select Play mode manually after connecting the 
device to the machine.

Perform necessary operations according to the instruction manual supplied with the 
PictBridge compliant device.