Delta CP750 Benutzerhandbuch

Seite von 50
38
2
Attach the battery pack terminal cover onto the battery.
3
Attach the battery cover onto the printer.
Push the battery cover in the direction indicated by the arrow until 
it clicks into place.
The printer indicator will begin to blink orange when the battery charge 
is low. In addition, a message may appear on a connected camera’s LCD 
monitor or the printer’s LCD monitor. Recharge the battery or exchange 
it for a fully charged one.
To protect the battery and prevent a decline in performance, do not charge 
it continuously for more than 24 hours. 
• This is a lithium ion battery pack so there is no need to completely use 
or discharge it before recharging.
• It can be charged at any charge state.
• You are advised to charge the battery on the day of use, or one day 
before, to ensure a full charge.
• Even charged battery packs continue to discharge naturally. 
• The battery life should be considered over when the usable time is 
severely limited even after the prescribed charging time. 
• Replace it with a new battery.
Battery Storage
• After you finish using the battery, attach the battery pack terminal 
cover and store it at a cool temperature (0°-30°C/32°-86°F).
Storing the battery fully charged for long periods of time (about 1 year) 
shortens the battery life and causes its performance to decline. When you do 
not use it for long period of time, fully charge it once a year and store after 
fully discharging it in the printer. 
Remaining Battery Charge
Battery Handling