Canon CP910/WHT Benutzerhandbuch

Seite von 65
35
5
  Use the camera to join the 
network displayed on the printer 
screen.
z
z
In the camera’s Wi-Fi settings, select the 
SSID (network name) displayed on the 
printer.
z
z
Enter the password displayed on the 
printer into the password field.
6
  Use the camera to print.
z
z
Use the camera to select images and 
print.
z
z
Once printing begins, the screen at left is 
displayed.
z
z
Do not disconnect the devices while this 
screen is displayed. Images may not be 
printed correctly or completely.
z
z
The standby screen at left is displayed 
when the camera is no longer connected.
Printing in progress cannot be canceled from SELPHY by using the <v> 
button. Use the camera to stop printing.
You can also connect the printer to a camera via an existing access point. In 
this case, connect the printer and camera to the same access point. For details 
The printer does not enable communication between the devices connected 
to it.
Subsequent Printing
), the 
second, standby screen in step 6 is displayed automatically when you 
turn on the printer. To print, after the standby screen is displayed, simply 
use the camera as described in steps 5 – 6.
During standby-screen display, you can view the SSID and password by 
pressing the <o> button. You can also change the password on the 
screen displayed by pressing the EDIT button (
).
Even during standby, you can print images on a memory card by 
inserting the card to access the screen in step 4 on