Canon CP910/WHT Benutzerhandbuch
54
Power
Cannot turn on SELPHY
•
Confirm that the power cord is connected and plugged in correctly (
).
•
Hold the <q> button until the startup screen is displayed (
•
When using Battery Pack NB-CP2L and Charger Adapter CG-CP200 (both sold
separately), confirm that the battery pack is charged and inserted correctly, and that
the cable is connected correctly.
Screen
[?] is displayed instead of images
•
Display is not possible because the image has no thumbnail. You can check the
image before printing by pressing the <-> button for full-screen display.
Printing
Cannot print
•
Confirm that SELPHY is on (
).
•
Confirm that the paper and ink cassettes are loaded correctly (
).
•
•
Confirm that you are using paper designed especially for SELPHY (
).
•
•
Confirm that you are using the correct combination of paper, paper cassette, and ink
cassette (
).
•
SELPHY will temporarily halt printing if it exceeds a specific temperature; this does
not indicate a problem. Wait until the printer cools off. During continuous printing, in
hot environments, or if the printer’s interior becomes hot because the rear-side air
vent (
) is blocked, SELPHY may temporarily stop printing, causing printing to
take longer.
Cannot display or print images on memory cards or USB flash drives
•
Confirm that the memory card is fully inserted in the correct slot, with the label face-
up (
,
).
•
•
Confirm that the image format is supported (
).
•
Confirm that a memory card requiring the use of an adapter has not been inserted
Cannot print from a camera
•
Confirm that your camera supports PictBridge (
).
•
Confirm that SELPHY and the camera are connected correctly (
).
•
Confirm that your camera batteries have enough charge left. If the batteries are
depleted, replace them with fully charged or new ones.
Cannot print from a computer
•
Confirm that you have installed the printer driver correctly (
).
•
Remove any inserted memory cards or USB flash drives.
•
When printing via Wi-Fi, confirm that both SELPHY and the computer are correctly
•
When printing via USB, confirm that SELPHY is connected directly to the computer
with the USB cable (
).
•
Windows: Confirm that the printer is not offline. If so, right-click the printer icon and
bring the printer online.
•
Macintosh: Confirm that you have added SELPHY to the Printer List (
).
No date when printing from memory cards or USB flash drives
•
Confirm that SELPHY is set up to print the date (
).
Note that in DPOF printing, date printing is configured on the camera.
No date when printing from cameras
•
Confirm that the date setting is enabled on the camera. Note that under standard
camera settings, the date setting on SELPHY will be used.