Canon CP910/WHT Benutzerhandbuch

9

z

z

Check the size on the paper cassette 

(such as “Postcard” or “Card Size”) to 

make sure it matches the size of the ink 

cassette.

z

z

There are two layers of covers. First open 

the outer cover ( ), and then the inner 

cover ( ).

z

z

Load the paper in the paper cassette.

z

z

The paper cassette holds up to 18 

sheets. Loading 19 or more sheets may 

damage the printer or cause malfunction.

z

z

Holding the paper as shown, load it with 

the glossy side up. (Do not touch the 

glossy side of the paper, which may affect 

print quality.)

z

z

Remove any protective sheets from 

the paper, and load only paper into the 

cassette.

z

z

When making postcard prints with space 

for a stamp, load the paper with the 

stamp area facing as shown.

Glossy 

side

z

z

Close the inner cover firmly until it clicks 

into place. Leave the outer cover open 

when printing.

Use only paper in a genuine Canon Color Ink / Paper Set for 

SELPHY CP printers. Other paper, such as regular postcards or 

paper for SELPHY ES printers, cannot be used.

Never do the following, which may damage the printer or cause 

malfunction.

- 

Loading paper upside-down, with the glossy 

and back sides reversed

- 

Bending or separating paper at the 

perforations before printing

- 

Using label paper whose upper label surface 

is peeling off or has been partially pulled up

- 

Writing on paper before printing

- 

Reusing paper, as by printing on blank areas 

(

)

Do not touch the springs on the paper 

cassette.  

Accidentally bending the springs may 

prevent efficient paper feeding.

Note that one spring is attached in the center on the top of card-size 

paper cassettes.

Avoid touching or rubbing the glossy, printing side of the paper. Do 

not handle paper with wet hands, and keep paper free of dust. Dirt 

or moisture may cause banding or affect print quality, or damage the 

printer (

).

Springs