Lexmark 1500 Series Benutzerhandbuch

Make sure you inserted the memory card into the correct slot. For more information, see “Inserting a memory card”
on page 43.

Check to see if there is no obvious damage to the memory card. Remove memory cards properly from the printer
to avoid corruption of data.

Make sure the file types stored on the memory card are supported by the programs installed on your computer.

Check that the USB cable is connected to the computer. The USB port on the back of the computer is marked

by the 

 USB symbol. Plug the long, flat end of the USB cable into this port.

Make sure that the smaller, more square end of the USB cable is plugged into the back of the printer.

Check that the USB cable is not damaged and that the 

 light is on.

If the printer and computer are connected over a network, make sure that the correct host and device are
communicating. Select the correct printer from the computer.

These are possible solutions. Try one or more of the following:

If you have more than one printer and use Windows, you must select your wireless network printer.

Do one of the following:

In Windows Vista, click 

 

Œ Control Panel Œ Printers.

In Windows XP and earlier, click Start 

Œ Settings Œ Printers and Faxes.

From the list shown, select the printer on your wireless network.

Note: To select the printer, right click the printer, and then select Set as Default Printer.

Insert the memory card in the printer.

Follow the instructions on the computer screen.

Make sure you inserted the memory card into the correct slot.

Make sure that the type of memory card you are using can be used in the printer.

Check to see that there is no obvious damage to the memory card. Remove memory cards properly from the printer
to avoid corruption of data.