Sony C4200 Benutzerhandbuch

Cause: The print or copy quality setting is set too high for the type of paper loaded
in the HP All-in-One.
Solution: Check the quality setting. Use a lower quality setting to decrease the
amount of ink used for printing or copying.
For more information, see:

•

•

Cause: The paper type is not suitable for the HP All-in-One.
Solution: Use HP Premium Papers or any other paper type that is appropriate for
the HP All-in-One.

For more information, see:

Cause: You are printing on the wrong side of the paper.
Solution: Load the paper with the print side down. For example, if you are loading
glossy photo paper, load the paper with the glossy side down.
For more information, see:

Cause: You are using non-HP ink.
Solution: HP recommends that you use genuine HP print cartridges. Genuine HP
print cartridges are designed and tested with HP printers to help you easily produce
great results, time after time.

HP cannot guarantee the quality or reliability of non-HP ink. Printer

service or repairs required as a result of printer failure or damage attributable to
the use of non-HP ink will not be covered under warranty.

Cause: The print cartridges need to be cleaned.

Solution: Print a self-test report to determine if there is a problem with the print
cartridges. If the self-test report shows a problem, clean the print cartridges. If the
problem persists, you might need to replace the print cartridges.
For more information on print cartridges, see 

.

Cause: The paper is not feeding properly or is loaded incorrectly.

Print quality troubleshooting

99