Sony C4200 Benutzerhandbuch
![Sony](https://files.manualsbrain.com/attachments/7e61ba04cadfce70cb41a1a70ef1d62a30f0a5fe/common/fit/150/50/682a2570dc00831b079177f57c62a2915dd3423eb752334060fbcf750d89/brand_logo.png)
Cause: More than one type of paper is loaded in the input tray.
Solution: Load only one type of paper at a time.
Solution: Load only one type of paper at a time.
Paper is not picked up from the input tray
Cause: There is not enough paper in the input tray.
Solution: If the HP All-in-One is out of paper or there are only a few sheets
remaining, load more paper in the input tray. If there is paper in the input tray, remove
the paper, tap the stack of paper against a flat surface, and reload the paper into the
input tray. To continue your print job, press Start Copy Black on the control panel of
the HP All-in-One.
For more information, see:
remaining, load more paper in the input tray. If there is paper in the input tray, remove
the paper, tap the stack of paper against a flat surface, and reload the paper into the
input tray. To continue your print job, press Start Copy Black on the control panel of
the HP All-in-One.
For more information, see:
Print troubleshooting
Use this section to solve these printing problems:
•
•
•
•
•
•
•
•
•
•
Envelopes print incorrectly
Cause: A stack of envelopes is loaded incorrectly.
Solution: Remove all paper from the input tray. Load a stack of envelopes in the
input tray, with the envelope flaps facing up and to the left.
Solution: Remove all paper from the input tray. Load a stack of envelopes in the
input tray, with the envelope flaps facing up and to the left.
NOTE:
To avoid paper jams, tuck the flaps inside the envelopes.
Print troubleshooting
103
Trou
bles
ho
ot
ing