Focus Enhancements FS-3 Benutzerhandbuch
2.0 STOP OUTPUT SETTINGS
The previous CLIP PREVIEW menu item in the
SETUP menu has been replaced with the STOP
OUTPUT menu. It is now possible to set stop
output to one of the following:
SETUP menu has been replaced with the STOP
OUTPUT menu. It is now possible to set stop
output to one of the following:
CLIP PREVIEW – When CLIP PREVIEW is
selected, the camcorder is in VTR mode and the
user scrolls from one clip to the next on FS-3
using the index buttons, the first frame of each
clip will be generated and showed via the DV
output after one second if the user pauses on that
clip.
selected, the camcorder is in VTR mode and the
user scrolls from one clip to the next on FS-3
using the index buttons, the first frame of each
clip will be generated and showed via the DV
output after one second if the user pauses on that
clip.
GRAY – When GRAY is selected and FS-3 is in
STOP mode, a GRAY splash screen is output via
the DV port.
STOP mode, a GRAY splash screen is output via
the DV port.
NO OUTPUT – When NO OUTPUT is
selected and FS-3 is in STOP mode, there is no
signal output via the DV port. For example, if
FS-3 is in AV/C CONTROL MODE and is being
controlled by a DV device via FireWire such as a
DV VTR or a DV converter (such as a Miranda
DVC-100 or DVC-800), it is necessary to use the
NO OUTPUT setting.
selected and FS-3 is in STOP mode, there is no
signal output via the DV port. For example, if
FS-3 is in AV/C CONTROL MODE and is being
controlled by a DV device via FireWire such as a
DV VTR or a DV converter (such as a Miranda
DVC-100 or DVC-800), it is necessary to use the
NO OUTPUT setting.
3.0 FORMAT DISK UPDATE
The format disk function on FS-3 has been
enhanced. When multiple disk drives are
connected (internal and/or external), it is now
possible to select which disk you would like to
format. When you select FORMAT from the
FS-3 UTILITIES menu, you will be asked to
confirm which disk you wish to format. To
select between available disk drives, press the
forward and backward index buttons on the FS-3
front panel (drives are ordered according to when
they were formatted. The oldest format will
appear as Volume 1).
enhanced. When multiple disk drives are
connected (internal and/or external), it is now
possible to select which disk you would like to
format. When you select FORMAT from the
FS-3 UTILITIES menu, you will be asked to
confirm which disk you wish to format. To
select between available disk drives, press the
forward and backward index buttons on the FS-3
front panel (drives are ordered according to when
they were formatted. The oldest format will
appear as Volume 1).
WARNING: FORMAT ERASES ALL DATA
ON THE DISK DRIVE!
ON THE DISK DRIVE!
Finally, select YES to begin the format process.
PAGE 4
FireStore FS-3 User Guide Addendum