Sony BRS-200 Benutzerhandbuch

4

• Avoid operating and storing the switcher in the 

following locations:
– Extremely hot or cold places (operating temperature: 

5°C to 40°C (41°F to 104°F)

– Places exposed to direct sunlight for a long period or 

close to heating appliances

– Close to sources of strong magnetism
– Close to sources of powerful electromagnetic 

radiation, such as radios or TV transmitters

– Places exposed to strong vibration or shock

• Using a mobile phone, etc. near the switcher may cause 

a malfunction or affect the images. Try to turn off mobile 
phones, etc. as much as possible when you are near the 
switcher.

• When the switcher is installed in a rack, leave more than 

10 cm (4 inches) of space at the left and right sides and 
more than 10 cm (4 inches) of space in the rear between 
the rack and the switcher.

• Leave space around the switcher for ventilation and 

maintenance when it is installed.
– Do not obstruct ventilation openings at the left and 

right sides of the Processor Unit.

– Leave spaces around the switcher for ventilation.
– Leave more than 10 cm (4 inches) of maintenance 

clearance at the rear of the switcher.

– When the switcher is installed on a horizontal position 

such as on a desk, leave more than 10 cm (4 inches) of 
space at the left and right sides. Leaving more than 10 
cm (4 inches) of space above the switcher is 
recommended for service operation.

Make sure to disconnect the power plug of the switcher 
from the AC outlet before cleaning.

• Use a soft, dry cloth to gently wipe the cabinet. Stubborn 

stains may be removed with a cloth lightly dampened 
with a mild detergent solution. Then wipe it with a soft 
dry cloth.

• Never use strong solvent, such as thinner, benzene, or 

insecticides, since they may damage the surface finish or 
fade indications on the switcher.

• If you wipe the cabinet forcibly using a cloth with any 

dust attached, the cabinet may be scratched.

• If the cabinet of the switcher is exposed to a rubber or 

vinyl object for a long period, the cabinet may be 
changed in quality, or some of the coating may come off.