RCA CC6271 Benutzerhandbuch

Carefully follow the instructions below.

The video light and bulb need to cool for approximately 30 minutes after
the camcorder has been used before the bulb assembly is replaced.

Do not touch the light bulb with your fingers.  If the bulb is accidentally
touched, wipe it with a soft cloth.  A dirty bulb may cause smoke and have
a reduced service life.

1. Insert a flat nonmetallic object (such

as a plastic screwdriver) in the hole.

3. Place the new bulb assembly into the

camcorder by inserting the top first
and then slide the assembly into
place.

2. Pull on the sides of the bulb

assembly and remove it from the
camcorder as shown.