Panasonic HC-V520 Benutzerhandbuch
- 113 -
≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any
other USB cables.)
≥ When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using a USB
cable while the unit is turned on, power is also supplied from the connected equipment to this
unit.
unit.
≥ For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc
recorder or DVD recorder.
≥ When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may appear
on the television connected to the Blu-ray disc recorder. In this case as well, perform the
operations of Steps 1 to 4.
operations of Steps 1 to 4.
≥ You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray disc
recorder or DVD recorder. Disconnect the USB cable before performing either of these
operations.
operations.
≥ If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder
to cancel the dubbing.
≥
If you convert the recording format of the scenes recorded in 1080/60p to 1080/60i, you can dub
them to devices that do not support AVCHD Progressive. (
them to devices that do not support AVCHD Progressive. (
)
About the screen indication of the unit
≥ When the unit is accessing the SD card, card access icon (
≥ When the unit is accessing the SD card, card access icon (
) appears on the unit screen
or the access lamp is on.
≥
When the unit is accessing the built-in memory, built-in memory access icon (
) appears
on the unit screen or the access lamp is on.
≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing
the media, as this may result in the loss of recorded content.
HC-V520M
HC-V520M