Panasonic HCV550K Benutzerhandbuch

≥ Even with a broadband line, the recommended optimal speed may not be reached depending on 

your environment.

≥ Narrowband lines such as analog modems cannot be used.
≥ If the line for the smartphone is switched, communication may be interrupted. In that case, 

connect again.

≥ Refer to [Help] in the “Image App” menu about how to operate.

∫ What you can operate with a smartphone

Confirm the condition inside the house
The monitoring video can be confirmed.

≥ The monitoring image can be recorded as a video or a still picture.
≥ It cannot be confirmed with multiple smartphones simultaneously.
≥ Depending upon the environment in which the device is used, motion picture may be like a 

frame rate is low.

Voice message
The smartphone and this unit can be used like radio transceivers, allowing the users to have a 
conversation by taking turns.

≥ You can talk up to 10 seconds in 20 second interval.
≥ Open the LCD monitor of this unit when using the Voice message function.

∫ What you can set with a smartphone

Moving/non-moving object detection
This unit can detect moving objects and non-moving objects in the home monitoring detection area.

≥ Once this unit is set to home monitoring (home monitoring standby state), it cannot detect 

moving objects for up to 5 minutes.

≥ Detection of some moving and stationary subjects may not be possible due to the condition of 

the subject. Check beforehand to see if detection of the moving or stationary object can be 
detected.

≥ If the movement of the subject is too fast or too slow, if the subject is too small, or if the 

surroundings are too dark, detection of moving and stationary objects may be impossible.

Automatic recording
You can record a motion picture on this unit as it detects a moving or non-moving object.

≥ Automatic recording will record for approximately 30 seconds.
≥ Automatic recording can record a maximum of 1 hour 15 minutes per day. Check the remaining 

available recording time.

≥ When automatic recording is performed with moving object detection, automatic recording is 

performed only once within the set time.

≥ When automatic recording is performed with non-moving object detection, the set time will be 

reset and non-moving object detection will start again.