Panasonic HCV550K Benutzerhandbuch

Seite von 207
- 148 -
∫ To configure the e-mail delivery settings
You can make the delivery setting of a broadcast notification e-mail and the setting for the 
scheduled time and date of the broadcast indicated in the e-mail.
1
Touch [E-MAIL SETUP].
2
Touch [ON] or [OFF].
3
(When [ON] is selected)
To set the scheduled broadcast date.
∫ To set the image quality
1
Touch [IMAGE QUALITY].
2
Touch the desired image quality.
≥ Depending on the line status of the broadband line, mobile router (tethering), etc. to which this 
unit is connected, the image and sound may be interrupted or the connection may be lost. Set the 
image quality on this unit by referring to the recommended optimal speeds (upstream) above.
≥ For information on the optimal speed, contact your service provider, etc.
≥ If the image being broadcast appears as if frames were dropped or stops when [AUTO] is set, 
change [IMAGE QUALITY] according to your environment.
≥ If the selected image quality has an image quality higher than the one you are using, images will 
appear as if the frame rate is low.
≥ Operation cannot be guaranteed for all devices.
≥ Even with a broadband line, the recommended optimal speed may not be reached depending on 
your environment.
≥ Narrowband lines such as analog modems cannot be used.
≥ If the line for the smartphone is switched, communication may be interrupted. In that case, 
connect again.
[ON]:
Enables e-mailing.
[OFF]:
Disables e-mailing.
[AUTO]:
Allows you to set the date on which 
 is touched.
[MANUAL]:
Allows you to set the desired time and date.
≥ The setting method is the same as [CLOCK SET]. (
Image 
quality
Picture size
Frame rate
Screen 
indications
Recommended optimal 
speed (upstream)
[High]
1280k720
5 to 30 fps
3 Mbps or higher
[Medium]
640k360
1 Mbps or higher
[Low]
320k176
500 kbps or higher
[AUTO]
Use this option to check the image quality and automatically set the item.