Panasonic HCV550K Benutzerhandbuch
- 157 -
Setting up a direct connection to a smartphone
Check if the smartphone you are using is compatible with WPS
≥ For US customers enter SSID and Password or scan QR code to connect.
j If the smartphone is compatible with WPS:
Proceed to the following [WPS Connection]
j If the smartphone is not compatible with WPS:
Proceed to the following “Connecting with QR code”
1
Press Wi-Fi button and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [WPS Connection].
5
Set the smartphone to WPS Mode.
1
Press Wi-Fi button and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [QR code].
≥ QR code is displayed on the screen of this unit.
5
Start up the smartphone application “Image App”.
6
On the smartphone, select [QR code] to scan the QR code displayed on the
screen of this unit.
screen of this unit.
≥ When using an Android device, the smartphone and this unit are connected directly, allowing you
to use remote operations. (
≥ When using an iOS device, perform the following operations:
1
1
Select the option that allows you to install the app on the profile screen of the “Image App”, and
follow the on-screen instructions to complete the installation.
follow the on-screen instructions to complete the installation.
2
Press the home button to close the displayed screen.
3
Select the network name (SSID) of this unit from the Wi-Fi setup of the smartphone.
≥ When the QR code cannot be scanned, refer to “Connecting by entering an SSID and Password”.
[WPS Connection]
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j
j
is displayed on the screen
Connecting with QR code
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j
j
is displayed on the screen