Panasonic HCV550K Benutzerhandbuch

Seite von 207
- 160 -
≥ Please refer to the operating instruction of the device in use for details about the setting of the 
wireless access point or smartphone.
If the Wi-Fi connection cannot be established
Problem
Check points
It cannot connect to the 
wireless access point.
The wireless access point 
is not detected.
(General)
≥ Turn ON the wireless access point.
≥ Approach the wireless access point and reconnect.
≥ If it takes time to complete the connection, the Wi-Fi 
connection will be aborted.
Reset the connection settings.
≥ Check how to connect to the wireless access point and how 
to set the security settings.
≥ Make sure the wireless access point is registered in this unit. 
≥ The device may be unable to locate the wireless access point 
due to problems with the signal. Refer to “Setting up a 
connection manually
”. (
([WPS Connection])
≥ Make sure the wireless access point is in the correct WPS 
standby mode.
≥ Make sure the PIN code has been correctly input.
([Search for wireless network] or [Manual Setting])
≥ Make sure the SSID and Password have been correctly input.
≥ Check the Authentication method, Encryption type, and 
Encryption key (Password).
Radio waves of the 
wireless access point get 
disconnected.
≥ The condition may improved by moving the location or 
changing the angle of the wireless access point.
≥ If you use another 2.4 GHz band device such as a microwave 
oven or cordless telephone nearby, you may interrupt the 
signal. Keep a sufficient distance from these types of devices.
The Wi-Fi connection is 
not possible between this 
unit and a smartphone.
(Wireless Access Point Connection)
≥ Make sure the smartphone is properly connected to the 
wireless access point by checking the Wi-Fi settings of the 
smartphone.
≥ Make sure this unit and the smartphone are connected to the 
same wireless access point.
≥ Make sure the wireless access point is registered in this unit. 
(Direct Connection)
≥ Make sure the smartphone is properly connected to this unit 
by checking the Wi-Fi settings of the smartphone.
≥ Make sure the SSID and Password have been correctly input.
≥ Make sure the smartphone is not connected to the wireless 
access point. If it is connected to the wireless access point, 
change the Wi-Fi access point using the smartphone’s Wi-Fi 
set up.