Panasonic HCV550K Benutzerhandbuch
- 74 -
This is for reducing the wind noise coming into the built-in microphones.
≥ Switch to Manual Mode. (
≥ Switch to Manual Mode. (
)
≥ This function’s default setting is [ON].
≥ When switching to Intelligent Auto Mode/Intelligent Auto Plus Mode, [WIND CUT] is set to [ON],
≥ When switching to Intelligent Auto Mode/Intelligent Auto Plus Mode, [WIND CUT] is set to [ON],
and the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.
Recording setting of the built-in microphone can be adjusted.
≥ [MIC SETUP] will become [STEREO MIC] when the [REC FORMAT] is set to [MP4/iFrame].
[WIND CUT]
: [RECORD SETUP]
# [WIND CUT] # [ON]
[MIC SETUP]
: [RECORD SETUP]
# [MIC SETUP] # desired setting
[STEREO MIC]:
Sound from two directions is recorded in 2 ch by forward-facing
stereo microphones.
stereo microphones.
[ZOOM MIC]:
Sound is recorded with changing the directionality in conjunction
with the zoom operation. Sounds near the front of the unit are
recorded more clearly if you zoom in (close-up) and surrounding
sounds are recorded more realistically if you zoom out (wide angle).
with the zoom operation. Sounds near the front of the unit are
recorded more clearly if you zoom in (close-up) and surrounding
sounds are recorded more realistically if you zoom out (wide angle).
MENU
MENU