Panasonic SDRH85K Betriebsanweisung

Seite von 132
107
VQT2L14
Problem
Check points
This unit cannot be 
operated though it is 
turned on.
This unit does not 
operate normally.
≥ Remove the battery or AC adaptor, wait about 
1 minute and then reconnect the battery or AC 
adaptor. Then about 1 minute later, turn on the 
power again. (Conducting the above operation while 
the media is being accessed may damage the data 
on the media.)
≥ If normal operation is still not restored, detach the 
power connected, and contact consumer support. 
(
l 124, 125)
The remaining time 
indication or the 
elapsed time 
indication is not 
shown.
≥ If you set [SETUP] 
> [DISPLAY] > [OFF], 
indications other than warnings and date etc. are not 
displayed. (
l 29)
The unit arbitrarily 
stops recording.
≥ Use an SD card that can be used for motion picture 
recording. (
l 23)
≥ The recordable time may have shortened due to the 
deterioration of the data writing speed or repeated 
recording and deletion. Using the unit, format the SD 
card, built-in memory or HDD (
l 76) 
≥ If the unit is exposed to strong vibrations or shocks 
while recording on HDD, recording may stop to 
protect the HDD. If the unit is used in a place with 
loud sounds, the recording may stop due to sound 
vibrations. Recording data on an SD card is 
recommended in these places.
Auto focus function 
does not work.
≥ Set the Intelligent Auto Mode to on.
≥ If you are trying to record a scene which is hard to 
bring into focus in Auto Focus Mode, use the Manual 
Focus Mode to adjust the focus. (
l 36, 61)
Color balance of 
images is strange 
when recording in a 
place such as a 
gymnasium.
≥ In a place with multiple light sources, such as a 
gymnasium or a hall, set the white balance setting to 
 (Indoor mode2). If you cannot record clearly 
with the 
 (Indoor mode2), set it to 
 (Manual 
adjustment mode). (
l 59)
SDR-H85
SDR-H85&S50&T55&T50-VQT2L14_eng.book  107 ページ  2009年12月22日 火曜日 午前10時33分