Panasonic HC-X1000 Benutzerhandbuch

- 115 -

Using remote operation with a direct connection

≥ Set the NFC function of the smartphone to ON.

Start up the smartphone application “Image App”.

Touch the smartphone on

of this unit.

≥ Touch the NFC mark while a message asking you to touch the

NFC mark on the device is displayed on the smartphone
screen.

≥ If this is the first time the smartphone is connecting to this unit,

touch [YES] on the screen of this unit, and then touch the
smartphone on

of this unit again.

≥ If the unit is not recognized even when touching the

smartphone, change positions and try again.

≥ The connection cannot be established while this unit is recording or in Playback Mode.
≥ When the connection is complete, the image of this unit will be displayed on the smartphone

screen.

If you touch the second smartphone when this unit has already been connected
to the first one

The remote operation with the first smartphone that has been connected to this unit will be cut off,
and the newly touched smartphone will be connected.
≥ The connection cannot be established while this unit is recording or in Playback Mode.

Proceed to Step 2 when your Wi-Fi connection has been made via [Direct Connection] in [Wi-Fi
Setup] (

l 125

Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi
function.

≥

is displayed

Select the following menu items to set up a Wi-Fi connection between this
unit and a smartphone.

≥ When the connection is complete,

will be displayed on the screen of this unit.

Start up the smartphone application “Image App”.

≥ The image of this unit will be displayed on the smartphone screen.

To exit remote operation:
Touch [EXIT] on the screen of this unit or press the USER button to which [Wi-Fi]
is registered.

≥ The

message is displayed.

Touch [YES] to close the indication.

If the device is Android (NFC-compatible)

If the device is Android (non-NFC-compatible) or iOS

: [Wi-Fi Setup]

# [Direct Connection]