Panasonic HC-X1000 Benutzerhandbuch
- 122 -
Connecting to a wireless access point
≥ Register [Wi-Fi] to a USER button. (
)
Check if the wireless access point you are using is compatible with WPS
j If the wireless access point is compatible with WPS:
Proceed to the following Connecting with WPS
j If the wireless access point is not compatible with WPS:
)
1
Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi
function.
function.
2
Select the menu.
≥ Touch [OK].
3
Touch the part with no display of a wireless
access point.
access point.
≥ For information on how to delete wireless access points or
change the display order of wireless access points, please
refer to [Wireless Settings] on page
refer to [Wireless Settings] on page
.
4
Touch [WPS Connection].
5
Set the wireless access point to waiting for WPS.
≥ For further details, please read the operating instructions for the
wireless access point.
≥ A message is displayed when the connection is complete.
≥ A message is displayed when the connection attempt fails. Touch
≥ A message is displayed when the connection attempt fails. Touch
[EXIT], and set the connection again.
Enter a PIN code to set the Wi-Fi connection
1
Touch [PIN code] in Step 5.
2
Touch the wireless access point to be connected.
≥ If you touch [Refresh], you can search for wireless access points again.
3
Touch [ENTER].
4
Enter the PIN code displayed on this unit screen into the wireless access
point.
point.
≥ For further details, please read the operating instructions for the wireless access point.
5
Touch [NEXT].
≥ A message is displayed when the connection is complete.
≥ A message is displayed when the connection attempt fails. Touch [EXIT], and set the connection
≥ A message is displayed when the connection attempt fails. Touch [EXIT], and set the connection
again.
Connecting with WPS
: [Wi-Fi Setup]
# [Wireless Settings]
MENU
A
[Wireless Settings]
B
[RETURN]
C
[Delete]
D
[ENTER]