Panasonic HC-X1000 Benutzerhandbuch
- 125 -
≥ When [WEP] is selected, proceed according to step 8.
7
Touch the desired Encryption method.
≥ If you select [NONE], a message is displayed after completing the connection.
8
(When selecting [WEP]/[TKIP]/[AES])
Touch [INPUT], then enter the Password.
≥ For details on how to enter characters, refer to page
.
≥ When the entry is complete, touch [Enter].
≥ A message is displayed when the connection is complete.
≥ A message is displayed when the connection is complete.
≥ Check the wireless access points instruction manual and settings when a saving wireless access
point.
≥ The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We
recommend you connect with the strongest possible Encryption method.
≥ When the signal of the wireless access point is weak, a connection may not be established. Refer
to “Messages” (
) for details.
≥ Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
Setting up a direct connection to a smartphone
≥ Register [Wi-Fi] to a USER button. (
)
Check if the smartphone you are using is compatible with WPS
j If the smartphone is compatible with WPS:
Proceed to the following Connecting with WPS
j If the smartphone is not compatible with WPS:
Proceed to the following “Connecting with QR code”
1
Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi
function.
function.
2
Select the menu.
3
Touch [Change connection type].
4
Touch [WPS Connection].
5
Set the smartphone to WPS Mode.
Network authentication type
Encryption types that can be set
[Open]
[NONE]/[WEP]
[WEP]
There is no setup of an encryption types.
[WPA-PSK]/[WPA2-PSK]
[TKIP]/[AES]
Confirming that the Wi-Fi connection is complete
j
is displayed on the screen
Connecting with WPS
: [Wi-Fi Setup]
# [
Direct Connection
]
MENU