Panasonic HC-X1000 Benutzerhandbuch

Seite von 180
- 14 -
∫ About batteries that you can use with this unit
(For the U.S.A. and Canada)
The battery that can be used with this unit is VW-VBD58/CGA-D54.
(For Areas other than the U.S.A. and Canada)
The battery that can be used with this unit is VW-VBD58/CGA-D54s.
Charging the battery
Important:
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, 
do not use the AC cable from other equipment with this unit.
≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC (50 o
and 86 oF). (The battery temperature should also be the same.)
C
AC cable (K2CA2CA00025; supplied)
≥ Insert the plugs as far as they will go.
Power supply
It has been found that counterfeit battery packs which look very similar to the genuine 
product are made available to purchase in some markets. Some of these battery packs 
are not adequately protected with internal protection to meet the requirements of 
appropriate safety standards. There is a possibility that these battery packs may lead to 
fire or explosion. Please be advised that we are not liable for any accident or failure 
occurring as a result of use of a counterfeit battery pack. To ensure that safe products are 
used we would recommend that a genuine Panasonic battery pack is used.
When this unit is purchased, the battery is not charged. Charge the battery fully before 
using this unit for the first time.
Charging lamp [CHARGE] A
Lights up:
Charging (Battery charging time: 
)
Goes off:
Charging completed
Flashing:
Be sure to connect the unit correctly (
)
Power lamp B
≥ This will light up when the AC cable is 
connected.