Panasonic SDR-S50 Benutzerhandbuch

Seite von 116
35
VQT2N91
This unit will resume recording pause mode 
about 0.8 seconds after the LCD monitor is 
reopened.
≥ Start time will not shorten if there is no SD 
card  inserted.
/
Start time will be shorten if the [Built-
inMemory] is selected in the [MEDIA 
SELECT], even if there is no SD card 
inserted.
/
Start time will be shorten if the [HDD] is 
selected in the [MEDIA SELECT], even if 
there is no SD card  inserted.
¬ Change the mode to 
.
1
Select the menu. (23)
2
Close the LCD monitor while 
the mode is set to 
.
The status indicator A flashes green and the 
unit goes into quick start standby mode.
3
Open the LCD monitor.
The status indicator A lights red and the unit 
is put into recording pause.
≥ When in quick start standby mode 
about 70% of the power used in 
recording pause mode is being 
consumed, so the recording time will 
be reduced.
≥ Quick start standby mode is cancelled if
j about 5 minutes elapsed
j mode is set to 
≥ It may take some time for automatic white 
balance to adjust.
≥ In the quick start mode, the zoom 
magnification becomes 1k.
≥ If [ECONOMY] (
l 25) is set to 
[5 MINUTES] and the unit automatically 
goes into quick start standby mode, close 
the LCD monitor and then open it again.
≥ Turn the unit off using the power button.
When the power is turned on with the mode 
set to 
, the unit will enter the recording 
pause mode after about 1.9 seconds.
Select the menu. (23)
≥ In the quick power on mode, the zoom 
magnification becomes 1k.
Quick start
[SETUP] 
# [QUICK START] # [ON]
SDR-T55
SDR-T50
SDR-H95
SDR-H85
Quick power on
[SETUP] 
# [QUICK POWER ON] # 
[ON]