Panasonic NV GS 330 Benutzerhandbuch
Before using
16
VQT1L48
Inserting/removing a card
Before inserting/removing a card, set the
[OFF/ON] switch to [OFF].
≥If the card is inserted or removed with the power
[OFF/ON] switch to [OFF].
≥If the card is inserted or removed with the power
turned on, this camera may malfunction or the
data recorded on the card may be lost.
data recorded on the card may be lost.
1
Turn off the power
1.
≥Check that the Status indicator has gone off.
2
Open the card slot cover.
3
Insert/remove the card into/from the card
slot.
slot.
≥When inserting a card, face the label side 1
towards you and push it straight in with one
stroke as far as it goes.
stroke as far as it goes.
≥When removing the card, press the centre of
the card and then pull it straight out.
4
Securely close the card slot cover.
ª
Concerning the card
≥Do not format the card with another movie
camera or any personal computer. This
operation may make the card unusable.
operation may make the card unusable.
≥If you wish to use Memory Cards that are 4 GB,
SDHC Memory Cards only can be used.
≥Memory Cards greater than 4 GB without the
SDHC Logo are not compliant with the SD
specifications.
specifications.
ª
Card access lamp
≥When the camera accesses the card (reading,
recording, playback, erasing, etc.), the access
lamp lights up.
lamp lights up.
≥If the following operations are performed when
the access lamp is lit, then the card or the
recorded data may be damaged or the camera
may malfunction.
recorded data may be damaged or the camera
may malfunction.
≥Inserting or removing the card.
≥Operating the [OFF/ON] switch or the mode
≥Operating the [OFF/ON] switch or the mode
dial.
≥Removing the battery or AC adaptor.
ª
SD Card
≥The memory capacity indicated on the SD Card
label corresponds to the total amount of
capacity to protect and manage the copyright
and the capacity available as conventional
memory for a movie camera, personal computer
or other equipment.
capacity to protect and manage the copyright
and the capacity available as conventional
memory for a movie camera, personal computer
or other equipment.
ª
Concerning the write protection
switch on the SD Card
switch on the SD Card
≥The SD Card has a write protection switch on it.
If the switch is moved to [LOCK], you cannot
write to the card, erase the data on it, or format
it. If it is moved back, you can.
write to the card, erase the data on it, or format
it. If it is moved back, you can.
OFF
ON
1
1
This unit is compatible with both SD Memory
cards and SDHC Memory cards. You can only
use SDHC Memory cards on devices that are
compatible with them. You cannot use SDHC
Memory cards on devices that are only
compatible with SD Memory cards.
(When using a SDHC Memory card on
another device, be sure to read the operating
instructions for that device.)
cards and SDHC Memory cards. You can only
use SDHC Memory cards on devices that are
compatible with them. You cannot use SDHC
Memory cards on devices that are only
compatible with SD Memory cards.
(When using a SDHC Memory card on
another device, be sure to read the operating
instructions for that device.)
VQT1L48_ENG.book 16 ページ ２００７年１２月１１日 火曜日 午後４時５５分