Panasonic NV GS 330 Benutzerhandbuch
Record mode
26
VQT1L48
Recording check
The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set
to a recording pause.
≥Set to Tape Recording Mode.
3 seconds. After checking, the camera will be set
to a recording pause.
≥Set to Tape Recording Mode.
1
Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon
the recording pause. Move the joystick
down until icon
1 appears.
2
Move the joystick left to select the
recording check icon [
recording check icon [
].
≥The [RECORDING CHECK STARTED]
indication appears on the screen of the movie
camera.
camera.
Blank search function
Searches for the last part of the image recorded
(unused part of the tape). After the search is
finished, the blank search function is cancelled
and the camera is put into recording pause.
≥Set to Tape Recording Mode.
(unused part of the tape). After the search is
finished, the blank search function is cancelled
and the camera is put into recording pause.
≥Set to Tape Recording Mode.
1
Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon
the recording pause. Move the joystick
down until icon
1 appears.
2
Move the joystick right to select the blank
search icon [
search icon [
].
3
When the confirmation message appears,
select [YES] and press the centre of the
joystick.
select [YES] and press the centre of the
joystick.
ª
Stopping blank search midway
through
through
Move the joystick down to select the [
∫] icon.
≥If the cassette tape has no blank part, then the
camera will stop at the end of the tape.
≥The camera stops at a point approx. 1 second
before the end of the last image recorded.
When you start recording at that point, the
image can be recorded seamlessly from the last
image.
When you start recording at that point, the
image can be recorded seamlessly from the last
image.
1
1
VQT1L48_ENG.book 26 ページ ２００７年１２月１１日 火曜日 午後４時５５分