Panasonic NV GS 330 Benutzerhandbuch
Record mode
33
VQT1L48
ª
To cancel fading
Select the [
] icon again.
≥The [FADE OFF] indication appears on the
screen of the movie camera.
ª
To select the colour for fade in/out
The colour which appears in fading pictures can
be selected.
be selected.
1
Set [ADVANCED] >> [FADE COLOUR] >>
[WHITE] or [BLACK].
[WHITE] or [BLACK].
≥While the fade in/fade out function is selected, it
takes several seconds to display the image
when you start recording images. Besides, it
also takes several seconds to pause recording.
when you start recording images. Besides, it
also takes several seconds to pause recording.
Wind noise reduction function
This reduces the wind noise coming into the
microphone when recording.
≥Set to Tape Recording Mode.
microphone when recording.
≥Set to Tape Recording Mode.
1
Set [BASIC] >> [WIND CUT] >> [ON].
ª
To cancel the wind noise reduction
function
function
Set [BASIC] >> [WIND CUT] >> [OFF].
≥The default setting is [ON].
≥Reduces the wind noise depending on the wind
≥Reduces the wind noise depending on the wind
strength. (If this function is activated in strong
winds, the stereo effect may be reduced. When
the wind weakens, the stereo effect will be
restored.)
winds, the stereo effect may be reduced. When
the wind weakens, the stereo effect will be
restored.)
Anti-Ground-Shooting (AGS)
This function prevents unnecessary recording
when you forget to pause recording and walk with
the camera tilted upside down while recording
continues.
≥If the movie camera continues to be tilted
when you forget to pause recording and walk with
the camera tilted upside down while recording
continues.
≥If the movie camera continues to be tilted
upside down from the normal horizontal position
while recording on a tape, it is automatically put
into recording pause.
while recording on a tape, it is automatically put
into recording pause.
AGS: Anti-Ground-Shooting
≥Set to Tape Recording Mode.
≥Set to Tape Recording Mode.
1
Set [SETUP] >> [AGS] >> [ON].
ª
To cancel Anti-Ground-Shooting
Set [SETUP] >> [AGS] >> [OFF].
≥The AGS function may activate and cause the
movie camera to pause the recording if you are
recording a subject right above or right below
you. In these cases, set [AGS] >> [OFF] then
continue the recording.
recording a subject right above or right below
you. In these cases, set [AGS] >> [OFF] then
continue the recording.
≥Use the recording start/stop button to pause or
stop the recording. The AGS function is only a
backup function for when you forget to pause
the recording.
backup function for when you forget to pause
the recording.
≥The time it takes the camera to be put into
recording pause after being tilted upside down
varies depending on the operating conditions.
varies depending on the operating conditions.
VQT1L48_ENG.book 33 ページ ２００７年１２月１１日 火曜日 午後４時５５分