Panasonic SDR-S10P Benutzerhandbuch

Seite von 136
41
VQT1D97
Setup
∫ Changing the display style
Press the MENU button, then select 
[SETUP]
 
# [DATE FORMAT] # 
desired display style and press the 
cursor button in the center.
≥ The date and time function are driven 
by a built-in lithium battery.
≥ Make sure to check the time before 
recording.
≥ If the time display becomes [- -], the 
built-in lithium battery has run down. 
Use the following steps to charge the 
battery. When you turn on the power 
for the first time after charging, a 
message asking you to set the date 
and time will appear. Select [YES] and 
set the date and time.
To recharge the built-in lithium battery
Connect the AC adaptor or attach the 
battery to the unit and the built-in lithium 
battery will be recharged. Leave the unit 
as it is for approx. 24 hours and the 
battery will save the date and time for 
approx. 6 months. (The battery will still 
be recharged even if the mode dial is set 
to OFF.) 
Adjusting the LCD 
monitor
1
Press the MENU button, then 
select [SETUP] 
# [LCD SET] 
# [YES] and then press the 
cursor button in the center.
2
Press the cursor button up or 
down to select the item to be 
adjusted. Then, press the 
button left or right to make the 
adjustment.
The bar display moves.
≥ Press the MENU button to exit the 
menu screen.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
Display style
Screen display
[Y/M/D]
2007.DEC.15
[M/D/Y]
DEC.15.2007
[D/M/Y]
15.DEC.2007
Adjusting the brightness 
and color level
VQT1D97(ENG).book  41 ページ  2007年3月20日 火曜日 午後5時33分