Panasonic NV-GS11GN Benutzerhandbuch

Others

ª Lock Setting (NV-GS15 only)

≥The Lock Setting carried out by this Movie 

Camera is only effective for this Movie Camera.

≥The SD Memory Card has a write protection 

switch on it. If the switch is moved to the [LOCK] 
side, you cannot write to or format the Card. If it 
is moved back, you can.

ª Playing Back on Your TV

≥Depending on your TV, nothing may be shown 

even if you correctly connect the movie camera 
with your TV. In this case, set [AV JACK] on the 
[AV IN/OUT] or [INITIAL] Sub-Menu to [OUT].

≥If you set [AV JACK] on the [AV IN/OUT] 

Sub-Menu to [IN/OUT], nothing will be shown 
on the TV screen except during playback. 

≥Picture size may be displayed differently when 

playing back a Cinema picture on a wide-screen 
TV with Playback Digital Effect.

ª Recording Pictures from a Card onto a 

≥When recording the Card Image on a Tape, its 

size is transformed into 720

k576 according to 

the DV format.

≥If you attempt to record a still picture with a 

large image size on a Tape, there may be a 
reduction in the quality of the image.

ª Audio Dubbing

≥The blank section of a tape cannot be dubbed.
≥Sounds sent through the DV Terminal cannot 

be dubbed.

≥If a tape has a non-recorded portion when the 

tape is dubbed, images and sounds may be 
disturbed when this portion of the tape is played 
back.

≥If you set the tape counter back to 0 at the 

position where you want to stop Audio Dubbing 
so as to make it possible to use the Memory 
Stop Function (

), Audio Dubbing is 

terminated automatically when the tape reaches 
this position.

≥In the case of importing data recorded with 

Audio Dubbing to a PC using the PC’s software, 
only the original sound (ST1) may be imported, 
depending on the software.

ª Recording the Contents of Other 

Recording to a Card (NV-GS15 only)
If you set the Mode Dial to Card Recording Mode, 
you can use the Photoshot function for external 
input signals.
≥Black streaks may appear at the 4 edges of the 

image.

Analog-Digital Conversion
≥When the Movie Camera is connected with 

other digital video equipment through its DV 
Terminal, images recorded in analog form from 
other external equipment can be output to the 
digital video equipment through the DV 
Terminal.

≥To DV-output analog video signals sent from 

other equipment, set [DV OUT] on the 
[AV IN/OUT] Sub-Menu to [ON]. (Normally, 
keep the [DV OUT] set to [OFF]. If it is set to 
[ON], the quality of the image may be 
disturbed.)

ª Using the DV Cable for Recording 

≥Regardless of the setting, digital dubbing is 

carried out automatically in the same audio 
recording mode as that of the playback 
Cassette.

≥The images on the recorded monitor may be 

disturbed, but it does not affect the recorded 
images.

≥Even if Playback Digital Effects, Playback 

Zoom, or Playback Title In have been used, 
these effects are not output from the DV 
Terminal.

≥Even if you use device equipped with DV 

Terminals (such as IEEE1394), you may not be 
able to perform Digital Dubbing in some cases.

≥Date or other information to be displayed cannot 

be displayed if the software of the connected 
equipment does not support the display 
function.

In the event of abnormal operation (e.g. if the unit 
emits smoke or an unusual smell), immediately 
stop operating the unit and consult the Panasonic 
Customer Care Centre on 132600.

ª After Use
1

ª Cautions for Use

When you use your Movie Camera in a rainy 
or snowy day or on a beach, make sure that 
no water enters the Movie Camera.
≥Water may cause the Movie Camera or 

Cassette to malfunction. (Irreparable failure 
may occur.)

15GN-ENG.book  52 ページ  ２００４年２月５日　木曜日　午後１０時５５分