Panasonic VDR-D105 Benutzerhandbuch

Seite von 108
36
LSQT1040
Reco
rd
in
g
Recording motion pictures
Recording motion pictures
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
Record motion pictures onto a disc.
1 Remove the lens cap, then turn the unit on.
If the unit is turned on with the lens cap fitted, the automatic white balance adjustment may not 
function properly.
2 Rotate the mode dial to select 
.
3 Press the recording start/stop 
button to start recording.
To end the recording
Press the recording start/stop button again to 
pause recording.
≥ [¥] and [;] are red during recording. Do not 
move this unit until [;] is green.
≥ The images recorded between pressing the recording start/stop button to start recording and 
pressing it again to pause recording become one scene.
≥ When about 5 minutes has passed without any operation, this unit automatically turns off to 
prevent the battery from running down. When you use this unit, turn it on again.
This setting can also be set to [OFF]. (l 79, POWER SAVE)
≥ The maximum number of scenes on a disc (per 
side): 999 (Even if there is remaining capacity for 
recording on a disc, you may not be able to record 
999 scenes.)
≥ While “WRITING THE INFORMATION ON THE 
DISC.” is displayed, do not disconnect the AC cable 
or remove the battery as doing so may make the 
disc unusable.
≥ Sound is recorded in Dolby Digital from the internal 
stereo microphone on the front of the unit. Take 
care not to block this microphone.
≥ Each time the unit enters the recording pause 
mode, the counter display will be reset to 
“0h00m00s”.