Panasonic NV-DS88A Benutzerhandbuch

≥

When [PROGRESSIVE] on the [CAMERA SETUP] 
Sub-Menu is set to [ON], the digital modes of [EFFECT1] 
on the [DIGITAL EFFECT] Sub-Menu cannot be used. 
(

l

ª

If either one of the following operations is carried out, stored 
images will be erased, and Wipe and Mix Functions cannot 
be used.

≥

Use the Camera Search Function

≥

Press the [STILL] Button

ª

If you continue to press the [

1

] Button for 5 seconds or 

longer, the Movie Camera switches to Repeat Playback 
Mode, and the [R

!

] Indication appears. (To cancel Repeat 

Playback Mode, set the [OFF/ON/MODE] Switch to [OFF].)

If you want to use headphones to listen to the playback 
sound, set [AV JACK] on the [AV IN/OUT SETUP] Sub-
Menu to [OUT/PHONES] and connect headphones to the 
[PHONES] Socket (

l

7) on the Movie Camera. In this case, 

no sound (including a warning sound and shutter sound) will 
not be reproduced through the built-in speaker of the Movie 
Camera.

You can select the sound by using the [AUDIO OUT] setting 
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:

Stereo Sound (main sound and sub sound)

L:

Left channel sound (main sound)

R:

Right channel sound (sub sound)

≥

If an attempt was made to perform audio dubbing for what 
was recorded with [12bit] selected as the [AUDIO REC] 
setting, the sound played back will be set to stereo 
regardless of the [AUDIO OUT] setting if [12bit AUDIO] is 
set to [MIX].

ª

≥

Index Search may not be possible at the beginning of tape.

≥

Because Photoshot Index Signals are not recorded on still 
pictures recorded in Continuous Photoshot Mode, the 
Photoshot Index Search Function cannot be used for these 
still pictures.

≥

Scene Index Search may not function properly if the 
interval between 2 scene index signals is shorter than 1 
minute.

ª

≥

Signals of images to which digital effects are added during 
playback cannot be output from the DV Terminal (

l

6) or 

Digital Still Picture Terminal (

l

33).

≥

You cannot use the Wipe or Mix Function while playing 
back the non-recorded portion of tape.

ª

≥

You cannot adjust the sound volume with the Remote 
Controller in Playback Zoom Mode.

≥

If you turn off the Movie Camera power or if you switch 
from VCR Mode to Camera Mode, Playback Zoom Mode is 
automatically cancelled.

≥

Even if Playback Zoom Functions are being used, images 
that are output from the DV Terminal (

l

6) or Digital Still 

Picture Terminal (

l

33) are not enlarged.

≥

As you enlarge an image, the quality of image suffers.

≥

During a Playback Zoom, the Variable Speed Search 
Function cannot be changed with the Remote Controller.

ª

≥

If you set [AV JACK] on the [AV IN/OUT SETUP] 
Sub-Menu to [IN/OUT], nothing will be shown on the TV 
screen except during playback.

ª

≥

The blank section of a tape cannot be dubbed.

≥

Sounds sent through the DV Terminal cannot be dubbed.

≥

If a tape has a non-recorded portion when the tape is 
dubbed, images and sounds may be disturbed when this 
portion of the tape is played back.

≥

If you set the tape counter back to 0 at the position where 
you want to stop Audio Dubbing so as to make it possible 
to use the Memory Stop Function (

l

50), Audio Dubbing is 

terminated automatically when the tape reaches this 
position.

≥

In the case of importing data recorded with Audio Dubbing 
to a PC using the PC’s software programme, only the 
original sound (ST1) may be imported, depending on the 
software programme.

ª

If you set the [TAPE/CARD] Selector to [CARD], you can use 
the Card Photoshot function for external input signals.

≥

Black streaks may appear at the 4 edges of the image.

≥

When the  [PHOTO SHOT] Button is pressed, the image 
may seem to move backward momentarily, but this does 
not affect the recording.

≥

While recording with analog input, a Card Photoshot 
cannot be used.

≥

When the Movie Camera is connected with other digital 
video equipment through its DV Terminal, images recorded 
in analog form from other external equipment can be output 
to the digital video equipment through the DV Terminal.

≥

To DV-output analog video signals sent from other 
equipment, set [DV OUT] on the [AV IN/OUT SETUP] 
Sub-Menu to [ON]. (Normally, keep the [DV OUT] set to 
[OFF]. If it is set to [ON], the quality of the image may be 
disturbed.)

ª

≥

Regardless of the setting, digital dubbing is carried out 
automatically in the same audio recording mode as that of 
the Cassette on the playback-side.

≥

The images on the monitor of the recording side may be 
disturbed, but it does not affect the recorded images.

≥

Even if Playback Digital Effects, Playback Zoom, or 
Playback Title In have been used, these effects are not 
output from the DV Terminal.

≥

Even if you use device equipped with DV Terminals (such 
as i.LINK), you may not be able to perform Digital Dubbing 
in some cases.

ª

≥

When the cooling function of a video printer has been 
working and the printing speed is dropping, Autoprint may 
stop. When this happens, set [AUTO PRINT] to [YES] once 
more.

≥

If you replace the Ink Cassette or paper during printing, the 
same picture may be printed twice.

≥

When the Movie Camera is not connected to the video 
printer properly, when the Ink Cassette is not inserted or is 
empty, or when the printer is out of paper, the 
[PRINTER ERROR] Indication appears.

≥

Some Photoshot images may be skipped during Autoprint.

A.book  44 ページ  ２００１年７月２８日 土曜日 午前９時２７分