Panasonic SDR-H18 Benutzerhandbuch

LSQT1190

After the software is installed, the unit must be 
connected to the computer and be correctly 
recognized by the computer.
≥ Connect after installing the software.
≥ If the supplied CD-ROM is inserted in the 

computer, remove it. (If the installer setup is 
running, wait until it finishes, then remove the 
CD-ROM.)

≥ If the recognition procedure is not 

accomplished properly, operation will not be 
possible after connecting the unit to the 
computer.

≥ If the unit fails to operate normally, it may mean 

that you have not conducted the installation or 
recognition procedure properly.

¬Connect this unit to the AC adaptor 

A USB cable (supplied)
≥ Insert the plugs as far as they will go. The unit 

and computer will not operate properly if the 
plugs are not inserted fully.

≥ Do not use any other USB cables except the 

supplied one. (Operation is not guaranteed 
with any other USB cables.)

The USB function selection screen will appear.

# [HDD] 

This unit is automatically recognized by the 
computer.

≥ When the unit is connected to a computer, 

its power cannot be turned off.
In this case, disconnect the USB cable (l 98).

≥ When a computer is accessing the HDD or 

card in this unit, the ACCESS/PC lamp or card 
access lamp lights. (

 or 

 appears on 

the LCD monitor.) Do not disconnect the USB 
cable or AC adaptor while the HDD or card is 
being accessed as it may damage the data.

≥ The HDD and card cannot be accessed 

simultaneously.

When the unit is connected to a computer, it is 
recognized as an external drive.
≥ This unit supports only the readout of data 

using the computer. The computer cannot write 
data to the unit, or erase data from the unit.

≥ Depending on the operating environment of the 

computer, the shape of the drive icon and the 
drive name will differ.

∫ Drive icons

A

LSQT1190(ENG).book  97 ページ  ２００７年１月１３日　土曜日　午後３時３２分