Panasonic VDR-M50PP Benutzerhandbuch

Seite von 174
68
Using External Microphone
Connect external microphone (optional-user provided) to the external microphone jack of this DVD Video Camera. 
Clearer sound can be recorded. Turn on the switch on microphone and start recording. For details on microphone, 
see “Major Specifications” on page 165.
Note
:
This DVD Video Camera cannot use a plug-in power type microphone (power supplied from Video Camera).
13
Setting Video Flash (Only for VDR-M70PP)
(See “Introduction to Optional Accessories” on page 145)
When recording stills in a dark place, or the subject is lit 
from rear, it is recommended that you use the optional 
VW-FLH3 Video Flash* (P. 145): Refer to the 
instruction manual of Video Flash for use.
* Unusable on VDR-M50PP.
Note
:
The DVD Video Camera automatically sets the shutter 
speed between 1/800 and 1/30 second (between 1/800 
and 1/10 second if Program AE has been set to Low 
Light) depending on subject brightness (
P. 80
).
When you use Video Flash with AUTO mode, “
(
 A
” will  
always be displayed.
An aim of an available range of Video Flash is about 
1 - 4 m.
See “Switching Quality of Still Image (Quality)” on 
page 87 if you want to change the still quality mode.
However, dark subjects may not be in clear focus even if 
the Video Flash is used. It is recommended that you 
illuminate a subject when recording in a dark place.
When you use accessories for hot shoe, the power is 
supplied by this DVD Video Camera.
A/V
MIC
To external 
microphone jack
Setting of 
Video Flash
On-screen 
information
Manner of 
emitting light
AUTO
 A
Automatically 
emits light in dark 
place or in a place 
lit from rear.
ON
Always emits light 
regardless of 
brightness.
OFF
No light emission.