Panasonic VDR-D300GN Benutzerhandbuch
W
ith othe
r prod
uc
ts
With a TV
110
LSQT1025
With other products
With a TV
(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)
The motion pictures and still pictures recorded by this unit can be played back on a TV.
≥ Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit and a TV.
* If the TV has an S Video terminal, also connect the
S Video plug to it. This allows you to enjoy more
beautiful pictures.
beautiful pictures.
2 Turn on this unit, then rotate the mode dial to select
or
.
3 Change the input channel on the TV.
≥ The channel set will differ depending on the terminal to which the unit is connected.
4 Start playback on this unit.
The image and audio are output on the TV.
∫ If the image or audio from this unit is not output on the TV
≥ Check that the plugs are inserted as far as they go.
≥ Check the connected terminal.
≥ Check the TV’s input setting (input switch). (For more information, please read the
≥ Check that the plugs are inserted as far as they go.
≥ Check the connected terminal.
≥ Check the TV’s input setting (input switch). (For more information, please read the
operating instructions for the TV.)
Playback on TV
A AV/S cable (supplied)
≥ Insert the plugs as far as they will go.
≥ Insert the plugs as far as they will go.
VIDEO IN
S VIDEO IN
*
AUDIO IN
A
≥ If the images are not displayed correctly on a wide-
screen TV, adjust the aspect setting on the TV.
(Refer to the operating instructions of the TV for
details.) If the pictures are displayed squeezed
horizontally on a regular TV (4:3), change the
[TV ASPECT] setting on this unit. (l 111)
(Refer to the operating instructions of the TV for
details.) If the pictures are displayed squeezed
horizontally on a regular TV (4:3), change the
[TV ASPECT] setting on this unit. (l 111)
LSQT1025(ENG).book 110 ページ ２００６年２月４日 土曜日 午後６時１０分