Panasonic VDR-D220GN Benutzerhandbuch
75
LSQT1161
Disc and card management
≥ When formatting a DVD-RAM, skip to step 3.
2
(When formatting a DVD-RW only)
Select format type (l 17), then
press the joystick.
3
When the confirmation message
appears, select [YES], then press
the joystick.
appears, select [YES], then press
the joystick.
≥ When formatting is complete, press the MENU
button to exit the message screen.
≥ In the case of a double sided disc, format each
side.
≥ It may not be possible to format a disc with
many scratches or dirt. Such discs cannot be
used.
used.
≥ During formatting, do not turn this unit off.
≥ When you format the disc, use a battery with
≥ When you format the disc, use a battery with
sufficient battery power or the AC adaptor.
Formatting DVD-RAM:
Formatting DVD-RW:
≥ Format on this unit.
≥ Format on this unit.
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
Information such as the number of recorded
scenes, the remaining space and whether or not
the disc is finalized or protected is displayed.
scenes, the remaining space and whether or not
the disc is finalized or protected is displayed.
¬Rotate the mode dial to select
or
.
Press the MENU button, then select
[DISC SETUP]
[DISC SETUP]
# [INFORMATION] #
[YES] and press the joystick.
To exit the information screen
Press the MENU button.
Card management
(SD)
Please be aware that if an SD card is formatted,
then all the data recorded on the card will be
erased. Store important data on a computer, etc.
then all the data recorded on the card will be
erased. Store important data on a computer, etc.
¬Rotate the mode dial to select
or
.
1
Press the MENU button, then
select [SETUP]
select [SETUP]
#
[FORMAT CARD]
# [YES] and
press the joystick.
2
When the confirmation message
appears, select [YES], then press
the joystick.
appears, select [YES], then press
the joystick.
≥ When formatting is complete, press the MENU
button to exit the message screen.
≥ We recommend formatting on this unit. If
formatting on a computer, use the supplied
software (VDR-D310). For more details, refer
to the operating instructions of the software.
If you connect this unit to a computer to format
a DVD-RAM, you cannot use DVDForm to
physically format it. Use a separate DVD-RAM
drive to physically format a DVD-RAM.
software (VDR-D310). For more details, refer
to the operating instructions of the software.
If you connect this unit to a computer to format
a DVD-RAM, you cannot use DVDForm to
physically format it. Use a separate DVD-RAM
drive to physically format a DVD-RAM.
Displaying disc information
Formatting an SD card
This is for initializing cards.
MENU
MENU
LSQT1161_GN.book 75 ページ ２００７年１月１９日 金曜日 午後１時８分