Panasonic VDR-M70GC Benutzerhandbuch

English

VQT0K98

13

Recording of still images is possible on DVD-RAM disc and 
card.

Turn the DVD Video Camera on.

When using DVD-RAM disc:
Set the power switch to “

”.

When using card:
Set the power switch to “

”.

After the ACCESS indicator goes out, perform 
the subsequent operation:

Check the subject on the screen (viewfinder or 
LCD).

Press the REC button.

The DVD Video Camera automatically focuses 
on the subject at the centre of screen (when auto 
focus is selected). 

The screen will be black, and then the recorded 
still will be displayed. When the “m” mark 
appears, you can proceed with the next 
recording; while “DISC ACCESS” or “CARD 
ACCESS” is being displayed, you cannot 
proceed with the next recording.

Set the power switch to “OFF” to turn the DVD 
Video Camera off.
Turn power off only after message “DISC 
ACCESS” disappears.

See “Size and Quality of Photos” on page 31 for details 
of stills on card.

See “Check 2” on page 143 if recording photos is not 
possible.

Do not operate the power switch or remove the card while 
the ACCCSS/PC or CARD ACCESS indicator is lit or 
blinking: Doing so may damage the card or the data on 
card.

With VDR-M70GC, the range of screen in which 
recording is possible will be different for movie and still.

The DVD Video Camera automatically sets the shutter 
speed between 1/800 and 1/30 second (between 1/800 
and 1/10 second if Program AE has been set to Low 
Light) depending on the subject brightness.

ACCESS/PC 
indicator

CARD 
ACCESS 
indicator

Power switch

REC button

218

ENG.book  Page 50  Tuesday, March 23, 2004  8:12 PM