Panasonic VDR-M70GC Benutzerhandbuch

English

VQT0K98

123

Press A button in the recording pause status.

The DVD Video Camera will enter the playback 
mode, and the scene you have recorded last will 
be played back.
When playback is finished, the DVD Video 
Camera will enter the pause status at the last 
image on disc.
If the playback pause status continues for as 
long as 5 minutes, the DVD Video Camera will 
automatically return to the recording pause 
status.

Press the C button.

Playback will stop, and recording pause status 
will be restored.

During playback of movie, playback sound will be heard 
from the speaker. Adjust the sound volume using the 
volume control buttons (

S

, 

R

).

You can play back the audio recorded in Dolby AC 3 (2ch).

To temporarily stop playback, press the 

A

 button. 

Press the 

A

 button again to restart playback.

Even if you stop playback midway and immediately start 
recording again, the new image will be recorded after the 
last scene on disc or card (the previous images will not be 
overwritten).

Image data edited on PC or certain types of image data 
may not appear on this DVD Video Camera.

Image data recorded on another camcorder may not be 
playable on this DVD Video Camera.

Depending on the amount of data to be played back, it 
may take some time for the playback image to appear.

Do not operate the power switch or remove the card while 
the ACCESS/PC or CARD ACCESS indicator is lit or 
blinking: Doing so may damage the card or the data on 
card.

Before You Begin

• Insert a disc or card recorded on this DVD Video Camera (P. 44, 47).
• Turn the DVD Video Camera on (P. 48).

225

ENG.book  Page 57  Tuesday, March 23, 2004  8:12 PM