Panasonic NV-GS300 Benutzerhandbuch

Edit mode

VQT0T29

≥If a picture containing a copyright protection 

signal (copy guard) is recorded by the movie 
camera, the picture is distorted by mosaic-like 
patterns at playback.

≥Disconnect the USB cable since input signals 

from the external input terminal cannot be 
recorded while it is connected with the USB 
cable.

≥While pictures are input from the DV terminal, 

the operation icon blinks on instead of 
appearing from the side of the screen when you 
press the centre of the joy stick.

≥While pictures are input from the DV terminal, 

the TV aspect will not change even if you 
change the setting for [TV ASPECT] in the 
[SETUP] menu.

You can add music or narration to the recorded 
cassette.
(Audio dubbing can only be performed by 
using the remote control.)
≥Set to Tape Playback Mode.

;] button on the remote 

;] button on the remote control 

≥Be sure that the sound is directed towards 

either the external microphone or the built-in 
microphone.

;] button on the remote control 

≥If a tape has a non-recorded portion when the 

tape is dubbed, images and sounds may be 
disturbed when this portion of the tape is played 
back.

ª

≥Set to Tape Recording Mode.
≥When you want to preserve the original sound 

taken during recording, set [ADVANCED] >> 
[AUDIO REC] >> [12bit] to take pictures. (When 
set [16bit], the sounds taken during recording 
are erased after recording with audio dubbing.) 

≥Set [BASIC] >> [REC SPEED] >> [SP] to take 

pictures.

ª

You can switch between the sound recorded with 
audio dubbing and the original sound.
Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].
[ST1]: It only plays back the original sound.
[ST2]: It only plays back the sound added by 

audio dubbing.

[MIX]:

It simultaneously plays back the original 
sound and the sound added with audio 
dubbing.

≥During audio dubbing, it is automatically set to 

[ST2].

REMOTE/MIC

;

;

¥ 

VQT0T29_ENG.book  48 ページ  ２００５年１１月２２日　火曜日　午後１１時５分