Panasonic AW-E860N Benutzerhandbuch

-27-

$

Phase adjustments must be performed with the camera or
the RCU (RCB) when external synchronizing signals are
supplied to the system in cases where multiple cameras are
used or peripheral devices are connected.

U

Observe the waveform of the external synchronizing input
signal (black burst signal) and video output signal on a 
two-channel oscilloscope. Then match the horizontal phase
of both signals by adjusting them with the cameras or RCU’s
horizontal phase control.

[ADJUSTMENT by CAMERA]
1. Press the NO/BAR switch for over 5 seconds to display

the color bar.

2. Select [G/L Adjustment] on the main menu, then select [H

Phase] on the submenu.

3. Adjust the horizontal phase with the YES/ABC and

NO/BAR switch.

[ADJUSTMENT with RCU (RCB, Hybrid control panel )]
Use the horizontal phase control.