Panasonic VQT2H52 Benutzerhandbuch

VQT2H52

Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
≥ Press the MANUAL button. (

l 66)

1/60 to 1/8000
≥ If [AUTO SLOW SHTR] is set to [ON], the 

shutter speed will be set between 1/30 and 
1/8000.

≥ If [DIGITAL CINEMA] is set to [ON], the shutter 

speed will be set between 1/48 and 
1/8000. (When [AUTO SLOW SHTR] is set to 
[ON], the range is 1/24 to 1/8000.)

≥ The shutter speed closer to 1/8000 is faster.

# (F16 to F2.0) # OPEN # (0dB to 

18dB)
≥ Value closer to [CLOSE] darkens the image.
≥ Value closer to [18dB] brightens the image.
≥ When the iris value is adjusted to brighter than 

[OPEN], it changes to the gain value.

≥ Press the MANUAL button again to restore to 

the automatic adjustment.

≥ When setting both the shutter speed and the 

iris/gain value, set the shutter speed and then 
set the iris/gain value.

Manual shutter speed adjustment
≥ If you increase the shutter speed manually, the 

noise on the screen may increase.

≥ You may see a band of light around an object 

that is shining very bright, or highly reflective.

≥ During normal playback, image movement 

may not look smooth.

≥ If you record an extremely bright object or 

record under indoor lighting, color and screen 
brightness may change or a horizontal line 
may appear on the screen. In this case, record 
in auto mode or set the shutter speed to 1/60 in 
areas where the power supply frequency is 
60 Hz, or 1/100 in areas of 50 Hz.

Manual iris/gain adjustment
≥ If the gain value is increased, the noise on the 

screen increases.

≥ Depending on the zoom magnification, there 

are iris values that are not displayed.

F

1/100

100

1/100

HDCSD10_TM10_TM15P-VQT2H52_eng.book  68 ページ  ２００９年７月６日　月曜日　午後１時４６分