Panasonic AJ-SPX800E Benutzerhandbuch

For shooting, follow the steps below.

Select a filter according to light conditions.

Position the WHITE BAL switch to [A] or [B].

have no time to adjust the white balance:
Position the WHITE BAL switch to [PRST].
This adjusts the white balance against the filter according
to the position of the FILTER control.

Select a filter according to light conditions. Then, position
the WHITE BAL switch to [A] or [B] and shoot a white test
subject so that it appears at the centre of the screen. Then,
follow the steps below to adjust the white balance.

1. Press the AUTO W/B BAL switch toward [AWB] to adjust

the white balance.

2. Press the AUTO W/B BAL switch toward [ABB] to adjust

the black balance.

3. Press the AUTO W/B BAL switch toward [AWB] to adjust

the white balance again.

For directions on making adjustments, see [4-1-1 Adjusting
the White Balance] and [4-1-2 Adjusting the Black
Balance].

Point the camera at your subject to adjust the focus, and
zoom.

To use the electronic shutter, set the shutter speed and
operation mode.
For more information, see [4-2 Setting the Electronic
Shutter].

Press either the REC START/STOP button, REC button on
the handle or VTR button at the lens to start recording.
During recording, the REC lamp in the viewfinder stays
illuminated. 

To stop recording, press either the REC START/STOP
button, REC button on the handle or VTR button at the lens.
The REC lamp in the viewfinder goes out. 

During recording, all operation buttons (REW, FF, PLAY/
PAUSE, STOP) are disabled.