Panasonic VQT3R48 Benutzerhandbuch
- 145 -
Playback/Editing
You can copy the data of the pictures you have taken from the built-in memory to a card or
from a card to the built-in memory.
from a card to the built-in memory.
Select [COPY] on the [PLAYBACK] Mode menu.
Press
3/4 to select the copy destination and then press [MENU/
SET].
(When [
] is selected) Press
2/1 to select the picture and then
press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
Exit the menu after it is executed.
•
Do not turn the camera off at any point during the copying process.
Note
•
If a picture exists with the same name (folder number/file number) as the picture to be copied in
the copy destination when [
the copy destination when [
] is selected, a new folder is created and the picture is copied.
If a picture exists with the same name (folder number/file number) as the picture to be copied in
the copy destination when [
the copy destination when [
] is selected, that picture is not copied.
•
It may take time to copy the picture data.
•
[PRINT SET], [PROTECT] or [FAVORITE] settings will not be copied. Perform the settings
again after copying is finished.
again after copying is finished.
•
Motion picture recorded in [AVCHD] cannot be copied.
[COPY]
: All the picture data in the built-in memory are copied onto the card at one
time.
: One picture at a time is copied from the card to the built-in memory.