Panasonic VQT3R48 Benutzerhandbuch

Seite von 189
Recording
- 86 -
You can take pictures with connections suitable for creating panorama images.
∫ Setting the recording direction
1
Press 
3/4 to select the recording direction and then press [MENU/SET].
The horizontal/vertical guideline will be displayed.
2
Take the picture.
You can retake the picture by selecting [RETAKE].
3
Press 
to select [NEXT] and then press [MENU/SET].
Part of the recorded image is displayed as a transparent image.
4
Take picture after moving the camera horizontally or 
vertically so the transparent image overlaps.
When taking the third and later pictures, repeat steps 
3
 and 
4
.
5
Press 
3/4 to select [EXIT] and then press [MENU/SET].
Note
The focus, zoom, exposure, White Balance, shutter speed and ISO sensitivity are fixed to the 
settings for the first picture.
We recommend using a tripod. When it is dark, we recommend using the Self-timer for taking 
pictures.
Shutter speed may slow down up to 8 seconds.
The shutter may remain closed (max. about 8 sec.) after taking the picture because of signal 
processing. This is not a malfunction.
The recorded images can be combined into panorama pictures using the software 
“PHOTOfunSTUDIO” on the CD-ROM (supplied).
Select this when you want to take pictures at a wedding reception, an indoor party etc. 
This allows you to take pictures of people and the background with near real-life 
brightness.
∫ Technique for Party Mode
Open the flash. (You can set to [
] or [
].)
We recommend using a tripod and the Self-timer for taking pictures.
We recommend rotating the zoom lever to Wide (1
k) and being about 1.5 m (4.92 feet) from 
the subject when taking pictures.
[PANORAMA ASSIST]
[PARTY]