Panasonic AJSPC700P Benutzerhandbuch

14

/ Shooting and Recording (camera unit)

Used to select a filter appropriate for illumination and
color temperature of the subject. 
When the menu option DISP MODE is set to “3”,
switching this control displays the selected filter number
in the viewfinder.

These buttons can be assigned user-selected functions,
using a menu option. Each button, when pressed,
performs the assigned function.
For more information, see [4-9-4 Assigning Functions to
USER MAIN, USER1 and USER2 Buttons].

Used to enable or disable the electronic shutter.

OFF: Electronic shutter disabled.
ON:

Electronic shutter enabled.

SEL: Used to change the speed of the electronic

shutter.

This dial switch returns to its original position. Each turn
of the switch alters the shutter speed.
For more information, see [4-2 Setting the Electronic
Shutter].

AWB: White balance is automatically adjusted.

When the WHITE BAL switch on the side is
positioned at [A] or [B], the adjusted value is
stored in the memory. 
However, if “VAR” is selected for the menu
options AWB A and AWB B, the value set through
the menu options is used, and this function does
not work. Menu options can be found in the
<WHITE BALANCE MODE> screen on the CAM
OPERATION page. 
Note also that when the switch is positioned at
PRST this function does not work.

ABB: Back balance is automatically adjusted.

To automatically correct black shading, the AUTO
W/B BAL switch must be pressed toward [ABB]
for longer than five seconds.   

To stop automatic adjustment of the white or black
balance in progress, set the switch to either ([AWB] or
[ABB]).
If automatic adjustment is cancelled, the value in effect
before automatic adjustment will be used.

Use this switch to select video amplifier gain, according
to lighting conditions under which you are shooting.
The values for L, M, and H can be preset using menu
options.
These are factory-set to 0 dB for L, 9 dB for M, and 18
dB for H.

!30"

!31"

!32"

#,52%2 'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧡᦬㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ