Panasonic AJSPC700P Benutzerhandbuch
70
Chapter 5 Preparation
(continued)
This completes the white shading adjustment.
The compensation values are stored in the non-volatile
internal memory. Therefore, re-adjusting the white shading is
not required, even after the camera-recorder power has
been turned off.
The compensation values are stored in the non-volatile
internal memory. Therefore, re-adjusting the white shading is
not required, even after the camera-recorder power has
been turned off.
Storing the Lens File Data
The white shading compensation values can be stored in the
internal memory as lens file data.
internal memory as lens file data.
1
Activate the MENU and go to the FILE page to open the
<LENS> screen. Turn the JOG Dial to move the cursor
to the item FILE NO.
<LENS> screen. Turn the JOG Dial to move the cursor
to the item FILE NO.
2
Press the JOG Dial button and FILE NO. will start
blinking. Turn the JOG Dial button to select the desired
lens file (1-8) to be stored.
blinking. Turn the JOG Dial button to select the desired
lens file (1-8) to be stored.
3
Press the JOG Dial button to confirm the lens file.
4
Turn the JOG Dial button to move the cursor to
[TITLE:].
[TITLE:].
5
Press the JOG Dial button. The cursor moves to the
title input field, and input mode is enabled.
title input field, and input mode is enabled.
6
Press the JOG Dial button again and turn it until a
desired letter for the title appears.
Turning the JOG Dial button changes the letter
displayed in the following sequence:
desired letter for the title appears.
Turning the JOG Dial button changes the letter
displayed in the following sequence:
Space:
Ð
Alphabetical characters:
A to Z
Ð
Numerals:
0 to 9
Ð
Symbols:
', >, <, /, -
7
Press the JOG Dial button to confirm the letter.
8
Turn the JOG Dial button to move the cursor to the next
position (to the right), and repeat Steps
position (to the right), and repeat Steps
6
to
7
to set the
letters for the title. (Up to 12 letters)
9
When the title input is completed, turn the JOG Dial
button to move the cursor to the [:] position.
button to move the cursor to the [:] position.
10
Press the JOG Dial button. The cursor returns to
[TITLE:].
[TITLE:].
11
Turn the JOG Dial button to move the cursor to
[WRITE:].
[WRITE:].
12
Press the JOG Dial button and the following message
appears.
appears.
13
Turn the JOG Dial button to move the cursor to [YES].
Then, press the JOG Dial button.
[WRITE OK] will appear after writing is completed,
indicating that the set data and the title have been
stored in the lens file area of the camera’s internal
memory.
Then, press the JOG Dial button.
[WRITE OK] will appear after writing is completed,
indicating that the set data and the title have been
stored in the lens file area of the camera’s internal
memory.
14
Press the MENU button to exit the menu operation.
Selecting the File number
/(16),/(!
),/(12
5($'
:5,7(
:5,7(
7,7/(
Adding a Title to the Selected File No.
/(16),/(!
),/(12
5($'
:5,7(
5($'
:5,7(
7,7/(
/(16),/(!
),/(12
5($'
:5,7(
7,7/(
5($'
:5,7(
7,7/(
:5,7("
<(6
<(6
12
7,7/(
#,52%2
'PINKUJDQQMࡍࠫ㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ