Panasonic AJ-HDX900P Benutzerhandbuch
12
2-2 Audio function section (input system)
1
2
3
5
6
7
9
; :
<
=
>
?
@
4
8
1
MIC IN (microphone input) jack (XLR, 5-pin)
Connect the microphone (optional accessory) here. The
power for the microphone is supplied from this jack.
<Note>
Components of 150 Hz are removed from the signals
input from this connector.
Connect the microphone (optional accessory) here. The
power for the microphone is supplied from this jack.
<Note>
Components of 150 Hz are removed from the signals
input from this connector.
2
AUDIO LEVEL CH1/CH2 (audio channel 1 & 2
recording level adjustment) controls
When the AUDIO SELECT CH1/CH2 switch 3 is set to
MAN, the recording level of audio channels 1 and 2 can
be adjusted using these controls.
The controls come with a locking mechanism. Therefore,
to adjust the recording level, simultaneously push in and
turn the controls.
recording level adjustment) controls
When the AUDIO SELECT CH1/CH2 switch 3 is set to
MAN, the recording level of audio channels 1 and 2 can
be adjusted using these controls.
The controls come with a locking mechanism. Therefore,
to adjust the recording level, simultaneously push in and
turn the controls.
3
AUDIO SELECT CH1/CH2 (audio channel 1 & 2
automatic/manual level adjustment selector) switch
This is used to select the method for adjusting the
recording levels of audio channels 1 and 2.
AUTO : Set here for automatic adjustment.
MAN : Set here for manual adjustment.
automatic/manual level adjustment selector) switch
This is used to select the method for adjusting the
recording levels of audio channels 1 and 2.
AUTO : Set here for automatic adjustment.
MAN : Set here for manual adjustment.
4
AUDIO IN (audio input selector) switch
These are used to select the input signals to be recorded
on audio channels 1 and 2.
FRONT :
These are used to select the input signals to be recorded
on audio channels 1 and 2.
FRONT :
The input signals supplied from the microphone which
has been connected to the MIC IN jack 1 are
recorded.
has been connected to the MIC IN jack 1 are
recorded.
W.L. (wireless) :
The input signals from the slot-in wireless microphone
receiver are recorded.
receiver are recorded.
REAR :
The audio input signals supplied from the audio
component which has been connected to the AUDIO IN
CH1/CH2 connectors 5 are recorded.
component which has been connected to the AUDIO IN
CH1/CH2 connectors 5 are recorded.
<Note>
When you use stereo microphone (AJ-MC900G optional),
set both CH1 and CH2 to [FRONT]. The signal from L CH
is recorded to CH1 and that from R CH to CH2.
When you use stereo microphone (AJ-MC900G optional),
set both CH1 and CH2 to [FRONT]. The signal from L CH
is recorded to CH1 and that from R CH to CH2.
5
AUDIO IN CH1/CH2 (audio input channel 1 & 2)
connectors (XLR, 3-pin)
An audio component or microphones are connected here.
This unit does not support AES/EBU signals.
connectors (XLR, 3-pin)
An audio component or microphones are connected here.
This unit does not support AES/EBU signals.
6
LINE/MIC/+48V (line input/mic input/mic input + 48V)
selector switch
This is used to switch the audio input signals from the
audio component which has been connected to the
AUDIO IN CH1/CH2 connectors 5.
LINE : The audio input signals from the audio component
selector switch
This is used to switch the audio input signals from the
audio component which has been connected to the
AUDIO IN CH1/CH2 connectors 5.
LINE : The audio input signals from the audio component
serving as the line input are selected.
MIC : The audio input signals from the internal power
supply type of microphone are selected. (The
phantom mic power is not supplied from the unit.)
phantom mic power is not supplied from the unit.)
+48V : The audio input signals from the external power
supply type of microphone are selected. (The
phantom mic power is supplied from the unit.)
phantom mic power is supplied from the unit.)
7
Wireless receiver slot
The UniSlot wireless receiver (optional accessory) can be
attached here.
The UniSlot wireless receiver (optional accessory) can be
attached here.
8
FRONT AUDIO LEVEL (audio recording level
adjustment) control
This enables the recording level of audio channels 1 and
2 to be adjusted.
However, when the AUDIO SELECT switch is set to the
AUTO position, the audio recording level is automatically
adjusted.
When the <MIC/AUDIO1> screen is opened from the VTR
MENU page by performing a menu operation, whether to
enable or disable the operation of this level control can be
set using the FRONT VR CH1 and FRONT VR CH2
setting items.
adjustment) control
This enables the recording level of audio channels 1 and
2 to be adjusted.
However, when the AUDIO SELECT switch is set to the
AUTO position, the audio recording level is automatically
adjusted.
When the <MIC/AUDIO1> screen is opened from the VTR
MENU page by performing a menu operation, whether to
enable or disable the operation of this level control can be
set using the FRONT VR CH1 and FRONT VR CH2
setting items.
Chapter 2 Parts and their functions
(continued)
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ12