Panasonic AJ-HPX3100G Benutzerhandbuch
20
Parts and their Functions: Audio (output) Function Section
10.
AUDIO OUT connector (XLR, 5-pin)
This connector outputs audio signals recorded on
Channels 1/2 or 3/4.
Output signals are selected with the 11.MONITOR
SELECT (audio channel) CH1/2 / CH3/4 selector switch.
Channels 1/2 or 3/4.
Output signals are selected with the 11.MONITOR
SELECT (audio channel) CH1/2 / CH3/4 selector switch.
11.
MONITOR SELECT (audio channel) CH1/2 /
CH3/4 selector switch
CH3/4 selector switch
Use this switch to select the audio channel whose
signals are output to the speakers, earphones or AUDIO
OUT connector.
signals are output to the speakers, earphones or AUDIO
OUT connector.
CH1/2: Signals on Audio Channels 1 and 2 are output.
CH3/4: Signals on Audio Channels 3 and 4 are output.
CH3/4: Signals on Audio Channels 3 and 4 are output.
The channel indications on the display window and on
the audio level meter in the viewfinder are synchronised
with this selector switch.
the audio level meter in the viewfinder are synchronised
with this selector switch.
12.
MONITOR SELECT (audio selection) CH1/3 / ST
/ CH2/4 selector switch
/ CH2/4 selector switch
The MONITOR SELECT switch is synchronised with the
audio signal output to the speakers and earphones, and
from the AUDIO OUT connector.
audio signal output to the speakers and earphones, and
from the AUDIO OUT connector.
CH1/3:
Signal on Audio Channel 1 or 3 is output.
ST:
Stereo audio signals on Audio Channels 1 and
2 or Audio Channels 3 or 4 are output. The
stereo signals can be changed to mixed
signals using a menu option.
2 or Audio Channels 3 or 4 are output. The
stereo signals can be changed to mixed
signals using a menu option.
CH2/4:
Signal on Audio Channel 2 or 4 is output.
* You can select between stereo and mixed signal
types using the menu option MONITOR SELECT.
This menu option can be found in the <MIC/
AUDIO> screen on the MAIN OPERATION page.
This menu option can be found in the <MIC/
AUDIO> screen on the MAIN OPERATION page.
13.
MONITOR (volume) control
Adjust the volume from earphones connected to the
15.Speakers, or 16. PHONES (earphones) jack.
15.Speakers, or 16. PHONES (earphones) jack.
14.
ALARM (warning alarm volume adjustment)
Used to control the volume of the warning sound
emitted from 15.Speakers or earphones connected to
the 16.PHONES (earphones) jack.
If the control is minimised, no alarm is audible.
emitted from 15.Speakers or earphones connected to
the 16.PHONES (earphones) jack.
If the control is minimised, no alarm is audible.
15.
Speakers
The speakers output EE sound during recording, and
reproduced sound during playback.
The speakers emit an alarm sound when the warning
lamp blinks and/or the indicator activates.
When the 16.PHONES (earphones) jack is connected
with earphones, sound from the speaker is
automatically muted.
reproduced sound during playback.
The speakers emit an alarm sound when the warning
lamp blinks and/or the indicator activates.
When the 16.PHONES (earphones) jack is connected
with earphones, sound from the speaker is
automatically muted.
16.
PHONES (earphones) jack (mini jack)
This connector is designed for audio monitoring (stereo)
earphones.
Both the front and rear connectors output the same
sound.
earphones.
Both the front and rear connectors output the same
sound.
Audio (output) Function Section
Monitor
switch
MONITOR SELECT switch
CH1/2
CH3/4
CH1/3
Audio Channel 1
Audio Channel 3
ST
Stereo signals from
Audio Channels 1
and 2*
Stereo signals from
Audio Channels 3
and 4*
CH2/4
Audio Channel 2
Audio Channel 4
AJ-HPX3100G(VQT3A79)_E.book 20 ページ ２０１０年９月１７日 金曜日 午後９時２１分