Panasonic AJ-HPX3100G Benutzerhandbuch
32
Recording and Playback: P2 Cards
Note
When using the camera-recorder for the first time, be sure to
set the time data beforehand.
> On how the time data is set, see [Setting Time Data] (page 62).
set the time data beforehand.
> On how the time data is set, see [Setting Time Data] (page 62).
1
Turn on the POWER switch.
2
Open the card slot cover.
3
Insert a P2 card into the P2 card slot until the
EJECT button pops up.
EJECT button pops up.
4
Push the eject button that pops up to the right.
Insert a P2 card into camera-recorder. The P2 CARD
ACCESS LED for the appropriate slot indicates the
status of the P2 card.
>[P2 CARD ACCESS LED and Status of P2 cards]
ACCESS LED for the appropriate slot indicates the
status of the P2 card.
>[P2 CARD ACCESS LED and Status of P2 cards]
(page 33).
5
Close the slot cover.
Notes
z
To prevent cards from falling out, dust from entering
and reduce the risk of exposure to static electricity,
close the card slot cover before moving the camera.
and reduce the risk of exposure to static electricity,
close the card slot cover before moving the camera.
z
Format P2 cards only on a P2 card device.
Inserting P2 Cards
POWER: ON
Card slot cover
EJECT button
Insert the card
with the logo
facing up.
with the logo
facing up.
P2 CARD
ACCESS
LED
ACCESS
LED
Recording and Playback
P2 Cards
AJ-HPX3100G(VQT3A79)_E.book 32 ページ 2010年9月17日 金曜日 午後9時21分