Panasonic PV-DV73 Betriebsanweisung

You can record still images to a Memory Card.

Slide the M-CARD Lock Switch to
unlock, then set POWER to M-CARD.
• The POWER lamp lights red.
• Be sure POWER is fully turned to

M-CARD position.

• “PLAY: PUSH PLAY KEY” is

displayed for 10 seconds. (p. 50)

Press MENU to display CARD SETUP
menu, then press JOG KEY to select

 , 

 or 

 .

• Press MENU to exit this menu.

Press PHOTOSHOT to record an
image.

• The PhotoShot image is recorded to

the Memory Card.

• When SHTR EFFECT is set to ON

(Menu OSD: p. 107), still pictures are
recorded with a visual shutter effect
and click sound. If set to OFF, the still
image will be displayed only.

POWER

JOG KEY

PHOTOSHOT

SUPER
FINE

FINE

NORMAL

1600 x 1200

1280 x 960

640 x 480

Approx. 14 images

Approx. 20 images

Approx. 70 images

• The number of images given for each

mode applies when all images are taken
in same mode.

• You can change recording modes at any

time before capturing an image.

• The number of images that can be

captured may differ depending on the
subject. After capturing an image, the
number may not decrease, or it may
decrease by two. This is normal.

• While “PROCESSING” is displayed, DO

NOT turn off the Palmcorder or unplug
the AC Adaptor (supplied) because this
will cause irreversible damage to the
memory.

• When recording DV Tape playback output

to the Memory Card, only NORMAL mode
is available. (p. 49)

• Connect the Palmcorder to a power

source. (pp. 14, 15)

• Set POWER to OFF before inserting a

Memory Card. (p. 13)

• When using an M-CARD, DV Output will

not function.

M-CARD
Lock

MENU

• 1600 x 1200 PhotoShot image is

interpolated from 1280 x 960 image.

• Some artifacting, softened edges or

picture noise may occur in Super
Fine (1600 x 1200) Mode.

DV73.p 48-51.p65

2003/06/30, 17:01

48