Panasonic AJ-HDX900 Benutzerhandbuch

105

The underlining in the variable range column indicates the setting in the preset
mode.

H.DTL LEVEL

00

: 

08

: 

31

For setting the horizontal detail correction
level for the down converter output signals.

V.DTL LEVEL

00

: 

04

: 

31

For setting the vertical detail correction level
for the down converter output signals.

DTL CORING

00
01

: 

15

For setting the noise elimination level of the
details.

H.DTL FREQ.

1

: 

3

: 

5

For selecting the horizontal detail
frequencies.
1: 2.5 MHz

4: 4 MHz

2: 3 MHz

5: 4.5 MHz

3: 3.5 MHz

C U F R

C U F R

C U F R

C U F R

2DLPF

ON
OFF

For setting the 2-D low path filter reducing
cross colors.
ON: Cross colors are reduced.
OFF: Cross colors are not reduced.

C U F R

SET UP
For AJ-HDX900E
For AJ-HDX900P

0%
7.5%

For setting the setup level for the down
converter output signals.
<Note>
When the system frequency is set to 50 Hz,
the setup level will be 0%.

C U F R

C U F R

C U F R

DOWNCON MODE

SQUEEZ
LT-BOX
S-CROP

For setting the mode of the down converter
output signals.

DETAIL

ON
OFF

For setting the detail function for the down
converter output signals ON/OFF.
The down converter output signals contain
detailed components that are set during HD
signal processing. In this setting, these
signals overlap the detailed components
dedicated to the down converter outputs.
Even if this setting is turned off, it is
impossible to turn off the detailed
components set during HD signal
processing.

GENLOCK

INT
EXT

For setting the standard signals for
executing the GENLOCK.
INT: For synchronizing to the standard

signal within the unit regardless of the
signals that are input in the GENLOCK
IN connector.

EXT: For synchronizing to the standard

signals that are input in the GENLOCK
IN connector.

H PHASE COARSE

–100

: 

+000

: 

+100

For making coarse adjustment for aligning
phases of the horizontal synchronization, for
executing the GENLOCK.

GL PHASE

HD SDI
COMPOSIT

For selecting the output signals that lock
phases to the signals that are input in the
GENLOCK IN connector.
HD SDI:

For locking the HD SDI signals to the
GENLOCK input.
For the down converter output signals,
the start position of the video delays by
about 90 lines.

For locking the down converter output
signals to the GENLOCK input.
For the HD SDI output signals, the start
position of the video gains by about 90
lines.

H PHASE FINE

–100

: 

+000

: 

+100

For making fine adjustment for aligning
phases of the horizontal synchronization, for
executing the GENLOCK.

C U F R

C U F R

01.AJ-HDX900_P_E(VQT0X86)_E  06.6.22  12:53 PM  ページ105