Panasonic AJ-HDX900 Benutzerhandbuch
113
7
Chapter 7 Menu description tables
(continued)
The underlining in the variable range column indicates the setting in the preset
mode.
mode.
∫
WHITE CLIP
ON
OFF
OFF
For selecting ON/OFF of the white clip
function.
When it is set to ON, the set value for the
WHITE CLIP LVL becomes effective.
function.
When it is set to ON, the set value for the
WHITE CLIP LVL becomes effective.
WHITE CLIP LVL
90%
:
109%
For performing the white clip level setting.
7-3-10 KNEE/LEVEL
Item
Variable
range
Remarks
MASTER PED
–200
:
+015
:
+200
For performing the MASTER PEDESTAL
setting.
setting.
∫
MANUAL KNEE
ON
OFF
OFF
For setting the mode which is to be
established when the AUTO KNEE switch is
at OFF. The KNEE POINT/SLOPE setting
value is active when ON is selected.
established when the AUTO KNEE switch is
at OFF. The KNEE POINT/SLOPE setting
value is active when ON is selected.
KNEE POINT
70.0%
:
93.0%
:
107.0%
For setting the knee point position in
increments of 0.5% steps.
increments of 0.5% steps.
KNEE SLOPE
00
:
85
:
99
For setting the inclination of the knee.
A.KNEE POINT
80%
:
93%
:
107%
For setting the auto knee point position in
increments of 0.5% steps.
When the OUTPUT/AUTO KNEE selection
switch is set to CAM.AUTO KNEE ON, this
function is enabled.
increments of 0.5% steps.
When the OUTPUT/AUTO KNEE selection
switch is set to CAM.AUTO KNEE ON, this
function is enabled.
A.KNEE LVL
100
:
107
:
109
For setting the auto knee level.
A.KNEE
RESPONSE
RESPONSE
1
:
4
:
8
For setting the auto knee response rate.
When a numerical value is larger, the
response speed is slower.
When a numerical value is larger, the
response speed is slower.
<Note>
Items with $ in front of their names are set by the PAINT
MENU SW ($) R/W menu items on the <CARD R/W
SELECT> screen.
Items without $ in front of their names are set by the PAINT
MENU LEVEL R/W menu item.
For details, refer to “7-6-2 CARD R/W SELECT.”
Items with $ in front of their names are set by the PAINT
MENU SW ($) R/W menu items on the <CARD R/W
SELECT> screen.
Items without $ in front of their names are set by the PAINT
MENU LEVEL R/W menu item.
For details, refer to “7-6-2 CARD R/W SELECT.”
S C U F R
S C U F R
S C U F R
S C U F R
S C U F R
S C U F R
S C U F R
S C U F R
S C U F R
7-3-11 GAMMA
Item
Variable
range
Remarks
MASTER GAMMA
0.30
:
0.45
:
0.75
For setting the master gamma in increments
of 0.01 steps.
of 0.01 steps.
R GAMMA
–15
:
+00
:
+15
For performing the gamma setting for Rch.
B GAMMA
–15
:
+00
:
+15
For performing the gamma setting for Bch.
GAMMA MODE
SEL
SEL
HD
SD
FILM LIKE1
FILM LIKE2
FILM LIKE3
SD
FILM LIKE1
FILM LIKE2
FILM LIKE3
For selecting the gamma mode.
HD:
HD:
Video gamma characteristics for HD
(High Definition)
(High Definition)
SD:
The gain in the dark section is higher than
the HD gamma.
the HD gamma.
FILM LIKE1:
The cinema gamma characteristics for
video applications are selected.
video applications are selected.
FILM LIKE2:
The cinema gamma characteristics for
video applications are selected.
In this setting gradations in highlit areas
can be expressed better than when FILM
LIKE1 is selected.
video applications are selected.
In this setting gradations in highlit areas
can be expressed better than when FILM
LIKE1 is selected.
FILM LIKE3:
The cinema gamma characteristics for
video applications are selected.
In this setting gradations in highlit areas
can be expressed better than when FILM
LIKE2 is selected.
video applications are selected.
In this setting gradations in highlit areas
can be expressed better than when FILM
LIKE2 is selected.
S
U F R
S C U F R
S C U F R
S C U F R
SD
HD
FILM LIKE1
FILM LIKE2
FILM LIKE3
Luminance
Video level
O
When the GAMMA MODE SEL item is used for FILM
LIKE3, the following settings are recommended.
LIKE3, the following settings are recommended.
MANUAL KNEE: ON
KNEE POINT
KNEE POINT
: 85.0%
KNEE SLOPE : 50
01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:53 PM ページ113